Tête de commutateur à clé Bartec série Bartec 2 positions, A verrouillage
Documents techniques
Spécifications
Brand
BartecSérie
Bartec
Nombre de positions
2
Type de clavette
4A 185
Position de retrait de clé
Toutes
Actionnement
Latching
Illuminé
No
Nombre de touches
2
Certification pour zones dangereuses
ATEX
Certification pour zones dangereuses
ATEX
Pays d'origine
Germany
Détails du produit
Têtes pour commutateurs
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
€ 112,67
€ 112,67 Each (hors TVA)
1
€ 112,67
€ 112,67 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire |
|---|---|
| 1 - 4 | € 112,67 |
| 5 - 9 | € 109,19 |
| 10+ | € 104,58 |
Documents techniques
Spécifications
Brand
BartecSérie
Bartec
Nombre de positions
2
Type de clavette
4A 185
Position de retrait de clé
Toutes
Actionnement
Latching
Illuminé
No
Nombre de touches
2
Certification pour zones dangereuses
ATEX
Certification pour zones dangereuses
ATEX
Pays d'origine
Germany
Détails du produit
Têtes pour commutateurs
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.