Documents techniques
Spécifications
Brand
Asco JoucomaticTension d'alimentation
230 V ac
Nombre d'orifices
3
Taille de connexion
1/4in
Raccord
G 1/4" femelle
Commande
Direct
Version
NC
Type d'application
Air, gaz inerte, Huile, Eau
Type d'application
3/2
Diamètre d'orifice
2.7mm
Matériau du corps
Brass
Séries
374
Pression de service maximale
10 bar
Plage de fréquence de fonctionnement
-25 → +60 °C
Connexion Genre
Female
Température de fonctionnement maximum
+60°C
Température d'utilisation minimum
-25°C
Filetage ou type de raccord
G
Facteur de débit Kv
0.22m³/h
Temps d'ouverture maximum
20ms
Temps de fermeture maximum
20ms
Pays d'origine
France
Détails du produit
Electrovannes 3//2 à commande directe série 374
Gamme d'électrovannes 3//2 NF à commande directe, série 374.
Encombrement réduit et faible poids, pour faciliter l'installation.
Pas de pression minimale de commande.
Disponible avec corps laiton ou inox.
Connecteur débrochable.
Bobine supplémentaire commandable séparemment ( 24Vca : 656-3232, 230Vca : 656-3226, 24Vcc : 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Prix sur demande
1
Prix sur demande
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
Asco JoucomaticTension d'alimentation
230 V ac
Nombre d'orifices
3
Taille de connexion
1/4in
Raccord
G 1/4" femelle
Commande
Direct
Version
NC
Type d'application
Air, gaz inerte, Huile, Eau
Type d'application
3/2
Diamètre d'orifice
2.7mm
Matériau du corps
Brass
Séries
374
Pression de service maximale
10 bar
Plage de fréquence de fonctionnement
-25 → +60 °C
Connexion Genre
Female
Température de fonctionnement maximum
+60°C
Température d'utilisation minimum
-25°C
Filetage ou type de raccord
G
Facteur de débit Kv
0.22m³/h
Temps d'ouverture maximum
20ms
Temps de fermeture maximum
20ms
Pays d'origine
France
Détails du produit
Electrovannes 3//2 à commande directe série 374
Gamme d'électrovannes 3//2 NF à commande directe, série 374.
Encombrement réduit et faible poids, pour faciliter l'installation.
Pas de pression minimale de commande.
Disponible avec corps laiton ou inox.
Connecteur débrochable.
Bobine supplémentaire commandable séparemment ( 24Vca : 656-3232, 230Vca : 656-3226, 24Vcc : 656-3383).
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.