Relais de contrôle de phase Dold série BH 9097, triphasé, 1 RT, 0 → 10s
Documents techniques
Spécifications
Brand
DoldApplication de surveillance
Phase
Phase électrique
3
Configuration de contact
SPDT
Type de montage
DIN Rail
Temporisation
0 → 10s
Séries
BH 9097
Taille
84mm
Longueur
121mm
Plage de température d'utilisation
+55°C
Température minimum d'utilisation
-20°C
Largeur
45mm
Température de fonctionnement maximale
+55°C
Dimensions
121 x 45 x 84mm
Pays d'origine
Germany
Détails du produit
Load monitor BH 9097
The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.
Features:
The BH 9097 load monitor monitors the actual power consumption of electrical loads
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
Standards
IEC 255, EN 60255, VDE 0435 part 303
Load monitor
€ 526,14
€ 526,14 Each (hors TVA)
1
€ 526,14
€ 526,14 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
DoldApplication de surveillance
Phase
Phase électrique
3
Configuration de contact
SPDT
Type de montage
DIN Rail
Temporisation
0 → 10s
Séries
BH 9097
Taille
84mm
Longueur
121mm
Plage de température d'utilisation
+55°C
Température minimum d'utilisation
-20°C
Largeur
45mm
Température de fonctionnement maximale
+55°C
Dimensions
121 x 45 x 84mm
Pays d'origine
Germany
Détails du produit
Load monitor BH 9097
The load monitor is suitable for monitoring electrical industrial drive systems with variable motor loads.
Features:
The BH 9097 load monitor monitors the actual power consumption of electrical loads
The device can be configured via DIP switches for negative load and overload monitoring or for overload monitoring with preliminary warning level
P1 and P2 settings are calibrated as absolute values; configuration via two rotary switches
Test / reset buttons for simple start-up
Switch state indicator via 2 LEDs
For motors up to 22 KW at 3 AC 400 V, without auxiliary voltage
Up to 40 A without external current transformer
Configurable start-up bridging, configurable response delay
Overall width 45 mm
Standards
IEC 255, EN 60255, VDE 0435 part 303
Load monitor