Capteur de niveau à flotteur Gems Sensors, Horizontal, vertical, sortie Relais, en Laiton/NBR, câble 1m

N° de stock RS: 395-7050Marque: Gems SensorsN° de pièce Mfr: 011-1900
brand-logo
Tout voir dans Capteurs de niveau à flotteur

Documents techniques

Spécifications

Type de mécanisme

Flotteur

Type de fixation

Horizontal, Vertical

Sortie de commutation

Relay

Matériau du corps

Laiton/NBR

Longueur de câble

1m

Température d'utilisation minimale

-40°C

Température de fonctionnement maximale

+80°C

Pression maximum

10bar

Pays d'origine

United States

Détails du produit

Metal Level Switches – Series 1900

With large float displacement, switch withstands rough service
IP64 rated
Output is SPST normally open
Suitable for high viscosity liquids

Warning

The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.

€ 91,80

€ 91,80 Each (hors TVA)

Capteur de niveau à flotteur Gems Sensors, Horizontal, vertical, sortie Relais, en Laiton/NBR, câble 1m

€ 91,80

€ 91,80 Each (hors TVA)

Capteur de niveau à flotteur Gems Sensors, Horizontal, vertical, sortie Relais, en Laiton/NBR, câble 1m

Les informations sur le stock sont temporairement indisponibles.

Les informations sur le stock sont temporairement indisponibles.

Documents techniques

Spécifications

Type de mécanisme

Flotteur

Type de fixation

Horizontal, Vertical

Sortie de commutation

Relay

Matériau du corps

Laiton/NBR

Longueur de câble

1m

Température d'utilisation minimale

-40°C

Température de fonctionnement maximale

+80°C

Pression maximum

10bar

Pays d'origine

United States

Détails du produit

Metal Level Switches – Series 1900

With large float displacement, switch withstands rough service
IP64 rated
Output is SPST normally open
Suitable for high viscosity liquids

Warning

The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.