CAPOT PROTECTION NEPTUNE TAILLE 14
Documents techniques
Spécifications
Brand
ITT CannonDétails du produit
Capots anti-poussière
Bouchons anti-poussière en plastique pour boîtiers mâles et femelles. Seule la taille de corps est nécessaire pour déterminer le bouchon correct. Les bouchons comprennent une pièce de retenue en plastique.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 9,29
€ 9,29 Each (hors TVA)
1
€ 9,29
€ 9,29 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire |
|---|---|
| 1 - 19 | € 9,29 |
| 20 - 39 | € 8,37 |
| 40+ | € 7,52 |
Documents techniques
Spécifications
Brand
ITT CannonDétails du produit
Capots anti-poussière
Bouchons anti-poussière en plastique pour boîtiers mâles et femelles. Seule la taille de corps est nécessaire pour déterminer le bouchon correct. Les bouchons comprennent une pièce de retenue en plastique.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.