Embases de circuit imprimé Molex, Pico-Lock, 4 pôles , 1.5mm 1 rangée, 3.0A, Angle droit

Embase Pico-Lock d'un pas de 1,50 mm - série 504050

Le matériau de l'embase Pico-Lock d'un pas de 1,50 mm CMS de la série 504050, angle droit de Molex est homologué UL94V-0. Les raccords et broches de borne sont en plaqué or et les clous de fixation du circuit imprimé sont étamés sur ces embases Pico-Lock d'un pas de 1,50 mm CMS de la série 504050, angle droit de Molex. La hauteur au-dessus de la carte de ces embases Pico-Lock d'un pas de 1,50 mm CMS de la série 504050, angle droit de Molex est de 2 mm.

1.5mm Wire to Board - Molex Pico-Lock

The Molex 1.50 mm Pitch SMT Pico-Lock Wire-to-Board system provides positive locking with high current capacity and a very low profile on the PCB. The unique side positive lock design of the Molex 1.50 mm Pitch SMT Pico-Lock Wire-to-Board system give this connector its ultra low profile with a mated height of 2 mm. Additional mating assurance of the Molex 1.50 mm Pitch SMT Pico-Lock Wire-to-Board system is provided via top friction locks, visual mating confirmation and by the header having a wide solder tab that is shaped to pass over the top of the housing providing additional mechanical stability. Operator handling is aided by the Molex 1.50 mm Pitch SMT Pico-Lock Wire-to-Board systems mating guide rib design which also provides polarization. The materials used for the Molex 1.50 mm Pitch Pico-Lock Wire-to-Board system are RoHS and Low-Halogen compliant.