Documents techniques
Spécifications
Brand
EMERSON ? ASCOTension d'alimentation
24 V dc
Nombre de ports
3
Taille de connexion
1/8in
Raccord
G 1/8" femelle
Commande
Direct
Position normale
NC
Type d'application
Air, gaz inerte, Huile, Eau
Type d'application
3/2
Diamètre d'orifice
1.6mm
Matériau du corps
Brass
Séries
356
Pression de service maximale
10 bars
Gamme de température de fonctionnement
10 → +60 °C
Filetage ou type de raccord
G
Connexion Genre
Female
Température maximale d'utilisation
+60°C
Température d'utilisation minimum
-10°C
Facteur de débit Kv
0.08m³/h
Temps de fermeture maximum
10ms
Temps d'ouverture maximum
10ms
Pays d'origine
United Kingdom
Détails du produit
Soupapes N / F tridirectionnelles, pression nulle
Electrovannes tridirectionnelles, pression minimale de fonctionnement nulle, normalement fermées avec raccordement par orifices filetés.
Corps en laiton
Pression non nécessaire pour le fonctionnement
Compact et léger
Connexion par fiche mâle DIN
Plage -10 °C à +100 °C
Peut être assemblé dans n'importe quelle position
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.
Prix sur demande
1
Prix sur demande
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
EMERSON ? ASCOTension d'alimentation
24 V dc
Nombre de ports
3
Taille de connexion
1/8in
Raccord
G 1/8" femelle
Commande
Direct
Position normale
NC
Type d'application
Air, gaz inerte, Huile, Eau
Type d'application
3/2
Diamètre d'orifice
1.6mm
Matériau du corps
Brass
Séries
356
Pression de service maximale
10 bars
Gamme de température de fonctionnement
10 → +60 °C
Filetage ou type de raccord
G
Connexion Genre
Female
Température maximale d'utilisation
+60°C
Température d'utilisation minimum
-10°C
Facteur de débit Kv
0.08m³/h
Temps de fermeture maximum
10ms
Temps d'ouverture maximum
10ms
Pays d'origine
United Kingdom
Détails du produit
Soupapes N / F tridirectionnelles, pression nulle
Electrovannes tridirectionnelles, pression minimale de fonctionnement nulle, normalement fermées avec raccordement par orifices filetés.
Corps en laiton
Pression non nécessaire pour le fonctionnement
Compact et léger
Connexion par fiche mâle DIN
Plage -10 °C à +100 °C
Peut être assemblé dans n'importe quelle position
3 Way Inert Gases and Fluid Valves
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.