Moteur pas-à-pas Bipolaire Hybride, 0.29Nm 1.8°, 4 fils
Documents techniques
Spécifications
Détails du produit
Moteur hybride de taille 17
Couple élevé similaire à celui de moteurs hybrides conventionnels de taille 23
Haute résolution : 200 pas/tour (400 pas/tour : 1/2 pas)
Conception bipolaire biphasée, adaptée pour le variateur code commande 255-9065
Bobinages à faible d'inductance pour taux de positionnement élevés
Axe avant et arrière
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Prix sur demande
1
Prix sur demande
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Détails du produit
Moteur hybride de taille 17
Couple élevé similaire à celui de moteurs hybrides conventionnels de taille 23
Haute résolution : 200 pas/tour (400 pas/tour : 1/2 pas)
Conception bipolaire biphasée, adaptée pour le variateur code commande 255-9065
Bobinages à faible d'inductance pour taux de positionnement élevés
Axe avant et arrière
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: