ACCÉLÉROMÈTRE 4-20MA 0-10MM/SEC
Documents techniques
Spécifications
Brand
MonitranDétails du produit
Accéléromètre homologué ATEX 4 - 20 mA série MTN1185I
Homologation ATEX groupe I et II.
Utilisé pour le collecteur de données IS, l'huile, l'exploitation minière, etc.
Sortie 4 - 20 mA pour l'interface PLC
Sortie proportionnelle à la vitesse RMS (mm/s)
Disponible avec des plages de vitesse de 0 - 10 mm/s (533-2368) ou de 0 - 25 mm/s (533-2374)
Fréquence de 2 Hz à 1 kHz
Plage dynamique : Peak de 50 g
Câble blindé PTFE de 5 mètres
Boîtier en acier inoxydable IP 67
A utiliser avec le goujon de montage Glue ou M8
Dimensions (DXL) : 27 x 43 mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.
Prix sur demande
1
Prix sur demande
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
MonitranDétails du produit
Accéléromètre homologué ATEX 4 - 20 mA série MTN1185I
Homologation ATEX groupe I et II.
Utilisé pour le collecteur de données IS, l'huile, l'exploitation minière, etc.
Sortie 4 - 20 mA pour l'interface PLC
Sortie proportionnelle à la vitesse RMS (mm/s)
Disponible avec des plages de vitesse de 0 - 10 mm/s (533-2368) ou de 0 - 25 mm/s (533-2374)
Fréquence de 2 Hz à 1 kHz
Plage dynamique : Peak de 50 g
Câble blindé PTFE de 5 mètres
Boîtier en acier inoxydable IP 67
A utiliser avec le goujon de montage Glue ou M8
Dimensions (DXL) : 27 x 43 mm
Accelerometers
Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.