Borne à leviers TE Connectivity DuraSeal, Taille 22 → 18 AWG, Type Prolongateurs, Isolée
Documents techniques
Spécifications
Brand
TE ConnectivityType d’épissure
Prolongateurs
Taille de fil
22→ 18 AWG
Diamètre
3.7mm
Isolation
Insulated
Couleur
Red
Matériau d'isolation
Nylon
Série
Duraseal
Matériau du contact
Copper
Placage du contact
Tin
Pays d'origine
Mexico
Détails du produit
Raccords
Rouge 0,25 à 1,6 mm²
Bleu 1 à 2,6 mm²
Jaune 2,7 à 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 41,62
€ 0,832 Each (In a Pack of 50) (hors TVA)
Standard
50
€ 41,62
€ 0,832 Each (In a Pack of 50) (hors TVA)
Standard
50
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire | Par Paquet |
|---|---|---|
| 50 - 200 | € 0,832 | € 41,62 |
| 250+ | € 0,674 | € 33,70 |
Documents techniques
Spécifications
Brand
TE ConnectivityType d’épissure
Prolongateurs
Taille de fil
22→ 18 AWG
Diamètre
3.7mm
Isolation
Insulated
Couleur
Red
Matériau d'isolation
Nylon
Série
Duraseal
Matériau du contact
Copper
Placage du contact
Tin
Pays d'origine
Mexico
Détails du produit
Raccords
Rouge 0,25 à 1,6 mm²
Bleu 1 à 2,6 mm²
Jaune 2,7 à 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed