Ampoule VCC 10 V, 27 mA, Bornier
Documents techniques
Spécifications
Brand
VCCTension nominale
10 V
Base de la lampe
Borne
Gamme de courant
27 mA
Diamètre
3mm
Taille de la lampe
T-1
Durée de vie h
10000h
Pays d'origine
Taiwan, Province Of China
Détails du produit
Lampe subminiature T-1 (3 mm) à sortie fils
Gamme d'indicateurs à filament T-1 (3 mm) à sortie fils, spécialement conçus pour l'éclairage dans les espaces confinés, par exemple les compteurs, les commutateurs, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Prix sur demande
Each (In a Pack of 50) (hors TVA)
50
Prix sur demande
Each (In a Pack of 50) (hors TVA)
50
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
VCCTension nominale
10 V
Base de la lampe
Borne
Gamme de courant
27 mA
Diamètre
3mm
Taille de la lampe
T-1
Durée de vie h
10000h
Pays d'origine
Taiwan, Province Of China
Détails du produit
Lampe subminiature T-1 (3 mm) à sortie fils
Gamme d'indicateurs à filament T-1 (3 mm) à sortie fils, spécialement conçus pour l'éclairage dans les espaces confinés, par exemple les compteurs, les commutateurs, etc.
Wire-Ended & Bi-Pin
Filament lamps will perform to specification and give optimum life when:,a) They are powered at the rated voltage from a stabilised 50Hz ac supply,b) Ambient temperature is in the range 20 to 25°C,c) No mechanical vibration is present.,Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA). Operation from a dc supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care therefore should be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.