Robinet à boisseau sphérique Legris en Laiton, 1/4pouce
Documents techniques
Spécifications
Brand
LegrisType d'application
2 voies
Matériau de la bille
Brass
Type de raccordement
Threaded
Filetage
BSPP
Filetage
1/4in
Matériau du corps
Brass
Sécurisé pour une utilisation avec
Water
Type de manipulateur
Lever
Matériau de la poignée
Zinc Alloy
Pression de service maximale psi
580psi
Maximum Working Pressure (psi)
580psi
Pression de service maximale bar
40bar
Pression de fonctionnement
40bar
Maximum Working Pressure (bar)
40bar
Pays d'origine
France
Détails du produit
Soupape quart de tour, homologuée
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
€ 30,38
€ 30,38 Each (hors TVA)
1
€ 30,38
€ 30,38 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire |
|---|---|
| 1 - 4 | € 30,38 |
| 5 - 9 | € 29,44 |
| 10+ | € 28,49 |
Documents techniques
Spécifications
Brand
LegrisType d'application
2 voies
Matériau de la bille
Brass
Type de raccordement
Threaded
Filetage
BSPP
Filetage
1/4in
Matériau du corps
Brass
Sécurisé pour une utilisation avec
Water
Type de manipulateur
Lever
Matériau de la poignée
Zinc Alloy
Pression de service maximale psi
580psi
Maximum Working Pressure (psi)
580psi
Pression de service maximale bar
40bar
Pression de fonctionnement
40bar
Maximum Working Pressure (bar)
40bar
Pays d'origine
France
Détails du produit
Soupape quart de tour, homologuée
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.