Ampoule RS PRO 6,5 V, 150 mA, E5
Documents techniques
Spécifications
Brand
RS ProTension nominale
6.5 V
Base de la lampe
E5
Courant nominal
150 mA
Diamètre
5mm
Taille de la lampe
T1 1/2
Longueur
16 mm
Couleur de l'optique
Clear
Luminosité
4 lm
Durée de vie h
2500h
Pays d'origine
Korea, Republic Of
Détails du produit
Lampes tubulaire LES T-1 (5 mm) et T-1 (6 mm)
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
€ 14,59
€ 1,459 Each (In a Pack of 10) (hors TVA)
10
€ 14,59
€ 1,459 Each (In a Pack of 10) (hors TVA)
10
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire | Par Paquet |
|---|---|---|
| 10 - 240 | € 1,459 | € 14,59 |
| 250 - 990 | € 1,30 | € 13,00 |
| 1000+ | € 1,096 | € 10,96 |
Documents techniques
Spécifications
Brand
RS ProTension nominale
6.5 V
Base de la lampe
E5
Courant nominal
150 mA
Diamètre
5mm
Taille de la lampe
T1 1/2
Longueur
16 mm
Couleur de l'optique
Clear
Luminosité
4 lm
Durée de vie h
2500h
Pays d'origine
Korea, Republic Of
Détails du produit
Lampes tubulaire LES T-1 (5 mm) et T-1 (6 mm)
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.