Tête de bouton poussoir, ComEx Bartec, Momentanée, Ø découpe 30 mm Rond
Documents techniques
Spécifications
Brand
BartecType de produit
Push Button Head
Séries
ComEx
Diamètre de découpe
30mm
Actionnement
Momentary
Type de bouton-poussoir
Round
Matériau du bouton poussoir
Thermoplastic
Diamètre du bouton-poussoir
30mm
Normes/homologations
No
Certification ATEX
No
Pays d'origine
Germany
Détails du produit
Têtes pour commutateurs
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Les informations sur le stock sont temporairement indisponibles.
€ 20,19
€ 20,19 Each (hors TVA)
1
€ 20,19
€ 20,19 Each (hors TVA)
Les informations sur le stock sont temporairement indisponibles.
1
| Quantité | Prix unitaire |
|---|---|
| 1 - 4 | € 20,19 |
| 5 - 9 | € 19,57 |
| 10+ | € 18,55 |
Documents techniques
Spécifications
Brand
BartecType de produit
Push Button Head
Séries
ComEx
Diamètre de découpe
30mm
Actionnement
Momentary
Type de bouton-poussoir
Round
Matériau du bouton poussoir
Thermoplastic
Diamètre du bouton-poussoir
30mm
Normes/homologations
No
Certification ATEX
No
Pays d'origine
Germany
Détails du produit
Têtes pour commutateurs
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.