Electrovanne Burkert 6014, 24 V c.a., 3 ports , NF

N° de stock RS: 306-9866Marque: BurkertN° de pièce Mfr: 125334
brand-logo
Tout voir dans Électrovannes

Documents techniques

Spécifications

Brand

Burkert

Alimentation

24 V ac

Nombre d'orifices

3

Taille du raccord

1/8in

Raccord

G 1/8" femelle

Commande

Direct

Position normale

NC

Type d'application

Gas, Liquid

Type d'application

3/2

Diamètre d'orifice

2mm

Matériau du corps

Brass

Série

6014

Pression de service maximale

10 bar

Plage de fréquence de fonctionnement

10 → +55 °C

Filetage ou type de raccord

G

Température maximum d'utilisation

+55°C

Connexion Genre

Female

Température minimum d'utilisation

-10°C

Temps de fermeture maximum

20ms

Facteur de débit Kv

0.11m³/h

Temps d'ouverture maximum

15ms

Pays d'origine

Germany

Détails du produit

Electrovannes NF 3 // 2 voies avec commande directe et connexion filetée, série 6014

Gamme d'électrovannes NF 3 // 2 de sortie A, sauf 439-032 (fonction C), avec échappement lorsqu'elles sont hors fonction, pour liquides neutres jusqu'à +100 °C.
Le solénoïde peut être positionné librement ou verrouillé dans 4 positions à intervalles de 90°.
Possibilité de changer le solénoïde sans enlever la vanne.
Matériau d'étanchéité FPM (Viton) haute qualité en série.
Connecteur DIN 43650A.
Corps en laiton.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Les informations sur le stock sont temporairement indisponibles.

€ 76,53

€ 76,53 Each (hors TVA)

Electrovanne Burkert 6014, 24 V c.a., 3 ports , NF

€ 76,53

€ 76,53 Each (hors TVA)

Electrovanne Burkert 6014, 24 V c.a., 3 ports , NF
Les informations sur le stock sont temporairement indisponibles.

Les informations sur le stock sont temporairement indisponibles.

Veuillez vérifier à nouveau plus tard.

QuantitéPrix unitaire
1 - 4€ 76,53
5+€ 74,23

Documents techniques

Spécifications

Brand

Burkert

Alimentation

24 V ac

Nombre d'orifices

3

Taille du raccord

1/8in

Raccord

G 1/8" femelle

Commande

Direct

Position normale

NC

Type d'application

Gas, Liquid

Type d'application

3/2

Diamètre d'orifice

2mm

Matériau du corps

Brass

Série

6014

Pression de service maximale

10 bar

Plage de fréquence de fonctionnement

10 → +55 °C

Filetage ou type de raccord

G

Température maximum d'utilisation

+55°C

Connexion Genre

Female

Température minimum d'utilisation

-10°C

Temps de fermeture maximum

20ms

Facteur de débit Kv

0.11m³/h

Temps d'ouverture maximum

15ms

Pays d'origine

Germany

Détails du produit

Electrovannes NF 3 // 2 voies avec commande directe et connexion filetée, série 6014

Gamme d'électrovannes NF 3 // 2 de sortie A, sauf 439-032 (fonction C), avec échappement lorsqu'elles sont hors fonction, pour liquides neutres jusqu'à +100 °C.
Le solénoïde peut être positionné librement ou verrouillé dans 4 positions à intervalles de 90°.
Possibilité de changer le solénoïde sans enlever la vanne.
Matériau d'étanchéité FPM (Viton) haute qualité en série.
Connecteur DIN 43650A.
Corps en laiton.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.