Bouton d'arrêt d'urgence Eaton GHG4188, Montage panneau
Documents techniques
Spécifications
Brand
EatonType de montage
Panel Mount
Configuration de contact
SPDT
Actionnement
Tirer pour relâcher
Série
GHG4188
Illuminé
No
Indice de protection
IP66
Matériau du bouton poussoir
Polyamide
Diamètre de bouton-poussoir
30mm
Référence fabricant
GHG4188155R1200
Température d'utilisation minimale
-20°C
Tension V c.a. maximum
500V
Certification pour zones dangereuses
ATEX
Matériau du corps
Polyamide
Pays d'origine
Germany
Détails du produit
Emergency Stop Pushbutton
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built in quick action bayonet feature. The switches are rated at 500V/16A and the signal lamps have a rated voltage of 24Vdc.Housings are made from EN polyamide and glass reinforced polyester. Operating temperature: -55 to +50°C.
1 x N/O and 1 x N/C contact block included
Red mushroom head
Pull to release action
Dimensions 57 x 38 x 77mm (behind panel); front of panel depth 30mm
€ 175,17
€ 175,17 Each (hors TVA)
1
€ 175,17
€ 175,17 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
EatonType de montage
Panel Mount
Configuration de contact
SPDT
Actionnement
Tirer pour relâcher
Série
GHG4188
Illuminé
No
Indice de protection
IP66
Matériau du bouton poussoir
Polyamide
Diamètre de bouton-poussoir
30mm
Référence fabricant
GHG4188155R1200
Température d'utilisation minimale
-20°C
Tension V c.a. maximum
500V
Certification pour zones dangereuses
ATEX
Matériau du corps
Polyamide
Pays d'origine
Germany
Détails du produit
Emergency Stop Pushbutton
Panel mounting for use in Zone 1 hazardous areas. Maximum panel thickness is 5mm and the mounting hole required is 30.5mm diameter.,Front element is fixed to panel using the clamp nut. Body/contact block components fitted from rear utilising the built in quick action bayonet feature. The switches are rated at 500V/16A and the signal lamps have a rated voltage of 24Vdc.Housings are made from EN polyamide and glass reinforced polyester. Operating temperature: -55 to +50°C.
1 x N/O and 1 x N/C contact block included
Red mushroom head
Pull to release action
Dimensions 57 x 38 x 77mm (behind panel); front of panel depth 30mm