Contact pour connecteur cylindrique ITT Cannon, série T2P Femelle, 18 → 16 AWG, A sertir
Documents techniques
Spécifications
Brand
ITT CannonGenre
Female
Taille de fil
18→ 16 AWG
Type de raccordement
Crimp
Séries
T2P
Type de contact
Signal
Gamme de courant
16A
Longueur
18.42mm
Placage du contact
Tin
Matériau de contact
Copper Alloy
Résistance de contact maximale
5mΩ
Température de fonctionnement minimum
-55°C
Température d'utilisation maximum
+125°C
Type de fixation
Cable Mount
Pays d'origine
Germany
Détails du produit
Connecteur de signaux
Construction en deux parties. Les contacts peuvent être sertis par un outil de type pince ou pince à cliquet.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 5,84
€ 0,584 Each (In a Pack of 10) (hors TVA)
10
€ 5,84
€ 0,584 Each (In a Pack of 10) (hors TVA)
Les informations sur le stock sont temporairement indisponibles.
10
Les informations sur le stock sont temporairement indisponibles.
| Quantité | Prix unitaire | Par Paquet |
|---|---|---|
| 10 - 10 | € 0,584 | € 5,84 |
| 20 - 50 | € 0,567 | € 5,67 |
| 60+ | € 0,543 | € 5,43 |
Documents techniques
Spécifications
Brand
ITT CannonGenre
Female
Taille de fil
18→ 16 AWG
Type de raccordement
Crimp
Séries
T2P
Type de contact
Signal
Gamme de courant
16A
Longueur
18.42mm
Placage du contact
Tin
Matériau de contact
Copper Alloy
Résistance de contact maximale
5mΩ
Température de fonctionnement minimum
-55°C
Température d'utilisation maximum
+125°C
Type de fixation
Cable Mount
Pays d'origine
Germany
Détails du produit
Connecteur de signaux
Construction en deux parties. Les contacts peuvent être sertis par un outil de type pince ou pince à cliquet.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.