Documents techniques
Spécifications
Brand
ITT CannonGenre
Male
Taille de fil
18→ 16 AWG
Type de raccordement
A sertir
Séries
T2P
Accessoire pour
Connecteurs 6/7 voies Trident et APD
Type de contact
Signal
Courant nominal
13A
Longueur
27.69mm
Placage du contact
Tin
Tension
30 V
Matériau du contact
Copper Alloy
Température d'utilisation minimum
-55°C
Température de fonctionnement maximale
+125°C
Détails du produit
Connecteur de signaux
Construction en deux parties. Les contacts peuvent être sertis par un outil de type pince ou pince à cliquet.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 47,64
€ 0,476 Each (In a Pack of 100) (hors TVA)
100
€ 47,64
€ 0,476 Each (In a Pack of 100) (hors TVA)
100
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Quantité | Prix unitaire | Par Paquet |
---|---|---|
100 - 100 | € 0,476 | € 47,64 |
200 - 200 | € 0,458 | € 45,76 |
300 - 300 | € 0,439 | € 43,88 |
400 - 400 | € 0,421 | € 42,12 |
500+ | € 0,40 | € 40,01 |
Documents techniques
Spécifications
Brand
ITT CannonGenre
Male
Taille de fil
18→ 16 AWG
Type de raccordement
A sertir
Séries
T2P
Accessoire pour
Connecteurs 6/7 voies Trident et APD
Type de contact
Signal
Courant nominal
13A
Longueur
27.69mm
Placage du contact
Tin
Tension
30 V
Matériau du contact
Copper Alloy
Température d'utilisation minimum
-55°C
Température de fonctionnement maximale
+125°C
Détails du produit
Connecteur de signaux
Construction en deux parties. Les contacts peuvent être sertis par un outil de type pince ou pince à cliquet.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.