Capot pour connecteur cylindrique Droit ITT Cannon série TNA, taille 14 pour Connecteur cylindrique Neptune, connecteur

Accessoires pour capots

Capots assurant une protection supplémentaire. La version étanche se compose d'un presse-étoupe d'étanchéité et d'un mécanisme de serrage intégrés. La version non étanche est dotée d'un serre-câble.

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.