Capot pour connecteur cylindrique ITT Cannon
Documents techniques
Spécifications
Détails du produit
Accessoires pour capots
Capots assurant une protection supplémentaire. La version étanche se compose d'un presse-étoupe d'étanchéité et d'un mécanisme de serrage intégrés. La version non étanche est dotée d'un serre-câble.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
€ 14,13
€ 14,13 Each (hors TVA)
1
€ 14,13
€ 14,13 Each (hors TVA)
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire |
|---|---|
| 1 - 19 | € 14,13 |
| 20 - 39 | € 12,70 |
| 40+ | € 11,43 |
Documents techniques
Spécifications
Détails du produit
Accessoires pour capots
Capots assurant une protection supplémentaire. La version étanche se compose d'un presse-étoupe d'étanchéité et d'un mécanisme de serrage intégrés. La version non étanche est dotée d'un serre-câble.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.