Ampoule RS PRO 24 V, 50 mA, E10
Documents techniques
Spécifications
Brand
RS ProPlage de tension
24 V
Base de la lampe
E10
Intensité nominale
50 mA
Diamètre
10mm
Taille de la lampe
T3 1/4
Longueur
28 mm
Couleur de lentille
Clear
Luminosité
4 lm
Durée de vie h
5000h
Pays d'origine
Korea, Republic Of
Détails du produit
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Les informations sur le stock sont temporairement indisponibles.
€ 10,96
€ 10,96 1 Pack of 10 (hors TVA)
1
€ 10,96
€ 10,96 1 Pack of 10 (hors TVA)
Les informations sur le stock sont temporairement indisponibles.
1
| Quantité | Prix unitaire |
|---|---|
| 1 - 9 | € 10,96 |
| 10 - 49 | € 9,90 |
| 50 - 249 | € 8,63 |
| 250 - 499 | € 7,35 |
| 500+ | € 6,15 |
Documents techniques
Spécifications
Brand
RS ProPlage de tension
24 V
Base de la lampe
E10
Intensité nominale
50 mA
Diamètre
10mm
Taille de la lampe
T3 1/4
Longueur
28 mm
Couleur de lentille
Clear
Luminosité
4 lm
Durée de vie h
5000h
Pays d'origine
Korea, Republic Of
Détails du produit
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.