Electrovanne Sirai V365, 24 V c.c., 3 ports , NF

N° de stock RS: 656-3529Marque: SiraiN° de pièce Mfr: V365B01C Z031A - 24VCC
brand-logo
Tout voir dans Électrovannes

Documents techniques

Spécifications

Brand

Sirai

Tension d'alimentation

24 V dc

Nombre d'orifices

3

Taille de connexion

M5

Raccord

Femelle métrique M5

Commande

Direct

Version

NC

Type d'application

Gas, Liquid

Type d'application

3/2

Diamètre d'orifice

1.2mm

Séries

V365

Matériau du corps

Brass

Pression de service maximale

8 bar

Plage de fréquence de fonctionnement

10 → +60 °C

Température maximale d'utilisation

+60°C

Connexion Genre

Female

Température d'utilisation minimum

-10°C

Filetage ou type de raccord

Metric

Temps d'ouverture maximum

10ms

Temps de fermeture maximum

10ms

Facteur de débit Kv

0.04m³/h

Pays d'origine

France

Détails du produit

Micro électrovanne 3//2 série V365

Micro électrovanne 2//2 NF à action directe, raccords M5.
Dimensions réduites, haute vitesse de réponse et nombre élevé de cycles.
Apte pour fluides et gazeux.
Ne pas utiliser avec les fluides dangereux du groupe 1.
Garnitures d'étanchéité pour montage fournies avec la vanne.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Les informations sur le stock sont temporairement indisponibles.

€ 109,58

€ 109,58 Each (hors TVA)

Electrovanne Sirai V365, 24 V c.c., 3 ports , NF

€ 109,58

€ 109,58 Each (hors TVA)

Electrovanne Sirai V365, 24 V c.c., 3 ports , NF
Les informations sur le stock sont temporairement indisponibles.

Les informations sur le stock sont temporairement indisponibles.

Veuillez vérifier à nouveau plus tard.

QuantitéPrix unitaire
1 - 4€ 109,58
5+€ 106,29

Documents techniques

Spécifications

Brand

Sirai

Tension d'alimentation

24 V dc

Nombre d'orifices

3

Taille de connexion

M5

Raccord

Femelle métrique M5

Commande

Direct

Version

NC

Type d'application

Gas, Liquid

Type d'application

3/2

Diamètre d'orifice

1.2mm

Séries

V365

Matériau du corps

Brass

Pression de service maximale

8 bar

Plage de fréquence de fonctionnement

10 → +60 °C

Température maximale d'utilisation

+60°C

Connexion Genre

Female

Température d'utilisation minimum

-10°C

Filetage ou type de raccord

Metric

Temps d'ouverture maximum

10ms

Temps de fermeture maximum

10ms

Facteur de débit Kv

0.04m³/h

Pays d'origine

France

Détails du produit

Micro électrovanne 3//2 série V365

Micro électrovanne 2//2 NF à action directe, raccords M5.
Dimensions réduites, haute vitesse de réponse et nombre élevé de cycles.
Apte pour fluides et gazeux.
Ne pas utiliser avec les fluides dangereux du groupe 1.
Garnitures d'étanchéité pour montage fournies avec la vanne.

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.