Documents techniques
Spécifications
Brand
TE ConnectivityType d'application
Fiche
Série
Duraseal
Taille minimale des conducteurs mm2
1.5mm²
Genre
Male
Taille maximale des conducteurs mm2
2.5mm²
Taille de la languette
6.35 x 0.8mm
Largeur de la languette
6.35mm
Epaisseur de la languette
0.8mm
Isolation
Isolée
Taille minimale des conducteurs AWG
16AWG
Taille maximale des conducteurs AWG
14AWG
Type de raccordement
Crimp
Couleur
Blue
Matériau de contact
Laiton
Placage du contact
Tin
Matériau d'isolation
Nylon
Pays d'origine
Mexico
Détails du produit
Lame duraseal
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 356,29
€ 1,425 Each (Supplied in a Bag) (hors TVA)
Paquet de production (Sac)
250
€ 356,29
€ 1,425 Each (Supplied in a Bag) (hors TVA)
Les informations sur le stock sont temporairement indisponibles.
Paquet de production (Sac)
250
Les informations sur le stock sont temporairement indisponibles.
Documents techniques
Spécifications
Brand
TE ConnectivityType d'application
Fiche
Série
Duraseal
Taille minimale des conducteurs mm2
1.5mm²
Genre
Male
Taille maximale des conducteurs mm2
2.5mm²
Taille de la languette
6.35 x 0.8mm
Largeur de la languette
6.35mm
Epaisseur de la languette
0.8mm
Isolation
Isolée
Taille minimale des conducteurs AWG
16AWG
Taille maximale des conducteurs AWG
14AWG
Type de raccordement
Crimp
Couleur
Blue
Matériau de contact
Laiton
Placage du contact
Tin
Matériau d'isolation
Nylon
Pays d'origine
Mexico
Détails du produit
Lame duraseal
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
