Documents techniques
Spécifications
Brand
TE ConnectivityType d’épissure
Butt
Type du produit
Splice Connector
Diamètre
3.7 mm
Taille minimale des conducteurs AWG
26 AWG
Isolation
Insulated
Taille maximale des conducteurs AWG
10 AWG
Couleur
Red
Matériau de l'isolant
Nylon
Série
DuraSeal
Matériau du contact
Copper
Type de raccordement
Crimp
Placage du contact
Tin
Normes/homologations
No
Pays d'origine
Mexico
Détails du produit
Raccords
Rouge 0,25 à 1,6 mm²
Bleu 1 à 2,6 mm²
Jaune 2,7 à 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Les informations sur le stock sont temporairement indisponibles.
€ 168,21
€ 0,673 Each (Supplied in a Bag) (hors TVA)
Paquet de production (Sac)
250
€ 168,21
€ 0,673 Each (Supplied in a Bag) (hors TVA)
Les informations sur le stock sont temporairement indisponibles.
Paquet de production (Sac)
250
Documents techniques
Spécifications
Brand
TE ConnectivityType d’épissure
Butt
Type du produit
Splice Connector
Diamètre
3.7 mm
Taille minimale des conducteurs AWG
26 AWG
Isolation
Insulated
Taille maximale des conducteurs AWG
10 AWG
Couleur
Red
Matériau de l'isolant
Nylon
Série
DuraSeal
Matériau du contact
Copper
Type de raccordement
Crimp
Placage du contact
Tin
Normes/homologations
No
Pays d'origine
Mexico
Détails du produit
Raccords
Rouge 0,25 à 1,6 mm²
Bleu 1 à 2,6 mm²
Jaune 2,7 à 6,6 mm²
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
