Documents techniques
Spécifications
Brand
TE ConnectivitySérie
Duraseal
Isolation
Insulated
Matériau d'isolation
Nylon
Longueur hors tout
30mm
Genre
Female
Taille minimale des conducteurs mm2
0.5mm²
Taille maximale des conducteurs mm2
1mm²
Taille minimale des conducteurs AWG
22AWG
Taille maximale des conducteurs AWG
18AWG
Diamètre du cylindre
4mm
Couleur
Red
Placage du contact
Tin
Matériau du contact
Copper Alloy
Détails du produit
Cosse à douille cylindrique - Duraseal
Cosse à douille cylindrique Duraseal en laiton étamé avec manchon d'isolation thermorétractable.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
€ 1,59
€ 1,59 Each (hors TVA)
Standard
1
€ 1,59
€ 1,59 Each (hors TVA)
Standard
1
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
Documents techniques
Spécifications
Brand
TE ConnectivitySérie
Duraseal
Isolation
Insulated
Matériau d'isolation
Nylon
Longueur hors tout
30mm
Genre
Female
Taille minimale des conducteurs mm2
0.5mm²
Taille maximale des conducteurs mm2
1mm²
Taille minimale des conducteurs AWG
22AWG
Taille maximale des conducteurs AWG
18AWG
Diamètre du cylindre
4mm
Couleur
Red
Placage du contact
Tin
Matériau du contact
Copper Alloy
Détails du produit
Cosse à douille cylindrique - Duraseal
Cosse à douille cylindrique Duraseal en laiton étamé avec manchon d'isolation thermorétractable.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed