Ampoule RS PRO 24 V, 120 mA, E10
Documents techniques
Spécifications
Brand
RS ProTension nominale
24 V
Base de la lampe
E10
Gamme de courant
120 mA
Diamètre
10mm
Taille de la lampe
T3 1/4
Longueur
28 mm
Couleur de l'optique
Clear
Luminosité
12 lm
Durée de vie h
3000h
Pays d'origine
Korea, Republic Of
Détails du produit
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
€ 10,71
€ 1,071 Each (In a Pack of 10) (hors TVA)
10
€ 10,71
€ 1,071 Each (In a Pack of 10) (hors TVA)
10
Les informations sur le stock sont temporairement indisponibles.
Veuillez vérifier à nouveau plus tard.
| Quantité | Prix unitaire | Par Paquet |
|---|---|---|
| 10 - 90 | € 1,071 | € 10,71 |
| 100 - 490 | € 0,964 | € 9,64 |
| 500 - 990 | € 0,803 | € 8,03 |
| 1000 - 2490 | € 0,75 | € 7,50 |
| 2500+ | € 0,684 | € 6,84 |
Documents techniques
Spécifications
Brand
RS ProTension nominale
24 V
Base de la lampe
E10
Gamme de courant
120 mA
Diamètre
10mm
Taille de la lampe
T3 1/4
Longueur
28 mm
Couleur de l'optique
Clear
Luminosité
12 lm
Durée de vie h
3000h
Pays d'origine
Korea, Republic Of
Détails du produit
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.