Module de freinage Crompton Controls 3 Phases, 5.5 KW, 400V

Pour garantir la conformité avec les réglementations PUWER 98, les machines telles que l'équipement de travail du bois doivent être dotées d'un dispositif de freinage automatique adapté assurant l'immobilisation de l'outil en moins de 10 secondes.
Ils doivent être installés sur le nouvel équipement, comme sur celui existant.
L'installation d'un module de freinage s'effectue en toute simplicité, avec une perturbation minimale du câblage existant lors d'une intégration a posteriori.
3 phases
Durée d'injection c.c. ajustable comprise entre 0,5 et 25 s
Démarreur moteur DOL intégré
Indice de protection IP55.

A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase induction motor. The unit may be located on a piece of machinery or adjacent to it, with little disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake unit, all the control wiring has to be supplied and installed by the customer, including interlocked contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included, optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors built in. Must be used with existing starter, also AC must pass through the unit so that it can be isolated before DC is injected. Only injects DC when E-stop activated.